|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Document 280-1 SMT Power Inductors - SPT Series * Toroid winding eliminates stray electromagnetic emissions * Two versions: Standard, current ratings up to 8 Amps; High current, with ratings up to 13.9 Amp Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant tin-silver over copper. Other terminations available at additional cost. Ambient temperature -40C to +85C Maximum part temperature: The part temperature should not exceed +85C (ambient + self-heating). Prolonged operation above +85C may result in a permanent increase in core loss and part failure due to thermal aging of the core material. Storage temperature Component: -40C to +85C. Packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 PCB washing Only pure water or alcohol recommended Part number1 Standard series SPT20L-112ML_ 1.1 SPT38L-382ML_ 3.8 SPT30L-522ML_ 5.2 SPT20L-702ML_ 7.0 SPT38L-752ML_ 7.5 SPT44L-792ML_ 7.9 SPT30L-123ML_ 12 SPT44L-143ML_ 14 SPT50L-163ML_ 16 SPT38L-223ML_ 22 SPT20L-233ML_ 23 SPT50L-263ML_ 26 SPT30L-353ML_ 35 SPT44L-413ML_ 41 SPT38L-733ML_ 73 SPT50L-733ML_ 73 SPT30L-174ML_ 170 SPT38L-294ML_ 290 SPT50L-564ML_ 560 SPT38L-674ML_ 670 SPT44L-115ML_ 1100 SPT50L-205ML_ 2000 High current series SPT44H-282ML_ 2.8 SPT44H-422ML_ 4.2 SPT50H-652ML_ 6.5 SPT50H-842ML_ 8.4 SPT68H-113ML_ 11 SPT68H-183ML_ 18 L at 0A2 20% (H) L typ3 (H) 1.01 2.5 3.8 6.2 5.1 4.9 9.4 9.0 9.3 16.2 17.6 16.1 29.7 29.1 58.1 50 114 192 350 383 670 1070 1.68 2.5 3.5 4.7 6.5 10.0 DCR max (mOhm) 16.0 9.3 19.9 95.0 18.7 16.2 47.2 23.6 19.7 63 320 32 166 85 290 133 640 657 550 1200 1908 1932 4.6 6.6 7.2 8.5 8.2 12.5 SRF typ4 (MHz) 360 133 60 70 73 49 33 20 19 34 21 9.2 12.0 9.5 5.0 14.0 3.3 2.3 1.0 1.2 0.73 0.40 136 72 46 23 20 9 1. When ordering, specify termination and packaging codes: Isat Body (A) size 3.4 8.0 4.8 1.4 5.4 7.8 2.8 5.5 7.2 2.7 1.0 5.1 1.4 2.7 1.3 2.6 0.94 0.90 0.90 0.72 0.70 0.71 13.9 11.4 12.4 10.4 14.0 10.0 1 3 2 1 3 4 2 4 5 3 1 5 2 4 3 5 2 3 5 3 4 5 6 6 7 7 8 8 SPT20L-112MLD Termination: L = RoHS compliant tin-silver over copper. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: D= 13 machine-ready reel EIA-481 embossed plastic tape. Body size 1: 750 per full reel. Body sizes 2-3: 350 per full reel. Body size 4: 300 per full reel. Body sizes 5-6: 250 per full reel. Body sizes 7-8: 200 per full reel. B= Less than full reel In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Inductance tested at 100 kHz, 0.1 Vrms on Agilent/ HP 4192A. 3. Inductance with Isat current applied tested at 100 kHz, 0.1 Vrms on Agilent/HP 4284A. 4. SRF measured on Agilent/HP 8753ES network analyzer. 5. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. Specifications subject to change without notice. Please check our website for latest information. Document 280-1 Revised 10/20/08 (c) Coilcraft, Inc. 2009 Document 280-2 SMT Power Inductors - SPT Series Body size 1 - 5 G Body size 6 - 8 G A max E A max E F F B max Recommended Land Pattern B max Recommended Land Pattern C max C max D 0.005 / 0,13 mm Terminations: Tin-silver over copper D 0.005 / 0,13 mm Size 1 2 3 4 5 6 7 8 A max 0.34/8,64 0.44/11,05 0.56/14,22 0.59/14,99 0.67/17,02 0.66/16,89 0.74/18,80 0.94/23,88 B max 0.34/8,64 0.44/11,18 0.56/14,35 0.61/15,62 0.70/17,78 0.66/16,89 0.74/18,80 0.94/23,88 C max 0.28/7,00 0.37/9,50 0.37/9,50 0.41/10,50 0.41/10,50 0.41/10,50 0.41/10,50 0.41/10,50 D1 0.26/6,60 0.35/8,89 0.45/11,43 0.50/12,70 0.58/14,73 0.56/14,22 0.63/16,00 0.82/20,83 E2 0.30/7,62 0.40/10,16 0.52/13,21 0.55/13,97 0.62/15,75 0.49/12,45 0.56/14,22 0.70/17,78 F2 0.27/6,86 0.36/9,14 0.46/11,68 0.51/12,95 0.59/14,99 0.57/14,48 0.64/16,26 0.83/21,08 G 0.06/1,52 0.06/1,52 0.06/1,52 0.06/1,52 0.06/1,52 0.08/2,03 0.08/2,03 0.08/2,03 Weight (g) 0.47 - 0.54 1.42 - 1.59 2.73 - 3.34 3.57 - 4.08 5.19 - 5.97 4.23 - 4.48 6.18 - 6.53 11.12 - 11.63 Dimensions are in inches / mm. Unless specified, tolerance is 0.009/0,25. 1. 0.015/0,38 2. 0.005/0,13 Typical L vs Current (Standard series) 10000 SPT50L-205 Typical L vs Current (High current series) 20 18 16 SPT68H-183 1000 SPT38L-674 SPT30L-174 Inductance (H) Inductance (H) 14 12 10 SPT50H-842 SPT68H-113 100 SPT38L-223 10 SPT38L-752 8 6 4 2 SPT50H-652 SPT44H-422 SPT44H-282 1 SPT20L-112 0.1 0 0.01 0.1 1 10 0.1 1 10 100 Current (A) Current (A) Specifications subject to change without notice. Please check our website for latest information. Document 280-2 Revised 10/20/08 (c) Coilcraft, Inc. 2009 Document 280-3 SMT Power Inductors - SPT Series Typical Temperature Rise vs Current* 70 70 Temperature rise (C) 60 50 40 30 20 10 0 0 Temperature rise (C) SPT20L-233 SPT20L-702 SPT20L-112 60 50 40 30 20 10 0 0 SPT50L-263 SPT50L-205 SPT50L-733 SPT50L-163 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 Current (A rms) 70 70 Current (A rms) Temperature rise (C) Temperature rise (C) 60 50 SPT30L-174 SPT30L-353 SPT30L-123 SPT30L-522 60 50 SPT44H-422 40 30 20 10 0 0 70 2 4 6 8 10 12 14 16 40 30 20 10 0 0 1 2 3 4 5 6 7 8 9 10 SPT44H-282 Current (A rms) 70 Current (A rms) Temperature rise (C) Temperature rise (C) 60 50 40 30 SPT38L-674 SPT38L-733 SPT38L-223 SPT38L-752 60 SPT50H-842 50 40 SPT50H-652 30 20 10 0 0 70 2 4 6 8 10 12 14 16 SPT38L-382 20 10 0 0 1 2 3 4 5 6 7 8 9 10 Current (A rms) 70 Current (A rms) Temperature rise (C) 60 Temperature rise (C) 60 50 40 30 20 10 0 0 SPT44L-115 SPT38L-294 SPT44L-413 SPT44L-143 SPT68H-183 50 40 30 20 10 0 0 2 4 6 8 10 12 14 16 SPT68H-113 SPT44L-792 1 2 3 4 5 6 7 8 9 10 Current (A rms) * Measured at 25C ambient. Current (A rms) Specifications subject to change without notice. Please check our website for latest information. Document 280-3 Revised 10/20/08 (c) Coilcraft, Inc. 2009 |
Price & Availability of SPT44H-282ML |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |